If you have been using a crossbow but lacking its main component, then you are in the right place since we have the best crossbow broadheads down in our list.
Best Crossbow Broadheads
As a hunter, you are likely to have a lot of equipment. Not all broadheads are the same, so it’s worth considering different types of Best Crossbow Broadheads. Determining the right head requires some knowledge, and hopefully, we will introduce some knowledge in this review guide.
List Of Best Crossbow Broadheads
Crossbow Broadheads | Speciality | Ratings | Check Price |
---|---|---|---|
EXCALIBUR BOLTCUTTER | Replaceable Blades | ⭐⭐⭐⭐⭐ | |
Wasp Archery | Great for Beginners | ⭐⭐⭐⭐⭐ | |
RAGE 2-BLADE | Most Reliable | ⭐⭐⭐⭐⭐ | |
G5 OUTDOORS HAVOC | High-quality components. | ⭐⭐⭐⭐ | |
GRIM REAPER X-BOW | Affordable | ⭐⭐⭐⭐ | |
MUZZY TROCAR | Replaceable Blades | ⭐⭐⭐ | |
Maifield Archery | Three-bladed fixed | ⭐⭐⭐⭐⭐ | |
Sinbadteck Hunting | Triangle design | ⭐⭐⭐⭐ | |
Barnett Cross Gamecrusher | Light Weight | ⭐⭐⭐⭐ | |
Rage Bowhunting | High Accuracy | ⭐⭐⭐⭐⭐ |
Table of Contents
1. EXCALIBUR BOLTCUTTER – Perfect Combination of Strength
With three blades and a 150-grain weight, the Boltcutter is designed to provide greater accuracy when moving at 300 feet per second. They have a durable stainless steel construction that can withstand high impact forces and optimize bolt penetration.
Sufficient Diameter
The diameter of the broadhead is 1 1/16 inches, which is enough to hunt whitetail deer and even larger prey, such as elk. The design is streamlined and skeletonized to reduce wind resistance, especially at long distances. The design of the broad sub makes it a viable alternative to the mechanical broad sub.
Easily Replaceable Blades
The blades are replaceable, but you can sharpen them and reuse the broadhead as a whole. It is not uncommon for crossbow hunters to hit multiple targets with one of these.
Best Performance
Due to its high performance, the blade is relatively expensive. However, because it can be used multiple times, it can save money in the long run.
Main Features
- Excalibur Boltcutters is a favorite of Crossbow Hunters, and when you hear the word “broadhead”, think of it immediately.
- Robust stainless steel construction
- 1-1 / 16-inch cutting head with three blades
- Compatible with high-speed hunting cross
- Weight: 150 capsules
- Optimizes the bolt’s penetration power
- Enhances accuracy over long distances
- Durable stainless-steel construction can withstand high impacts
- Three blades have a sufficient diameter of 1 1/16 inches
- Streamlined design
- High price tag
Excalibur Boltcutters offers the perfect combination of strength, speed, and accuracy.
2. Wasp Archery Sharpshooter Traditional – Best Choice for Beginners
This is a four-bladed, fixed-style 150-cap thick head, so it adds a punch after each shot. Made of solid steel gaskets and durable, the blades are also polished with a 0.040-inch thick main blade and 0.027-inch replaceable blades.
No Damages
These sharp blades can easily penetrate thick and tough tides without being damaged, so they can be used for many years. Four blades ensure a larger wound channel, and weight ensures it can fly steadily over longer distances.
Great Choice for Beginners
Wasp Archery Sharpshooter Traditional 150 Capsules is a great choice for beginners and experts. These fixed sealers are made of solid steel washers, and due to the material’s advantages, they are optimized for strength and durability, ensuring they can last for many seasons. These models feature an auto-aligned blade lock system to ensure consistent flight after each shot. The cut diameter is one inch wide to ensure a humane ending for the animal.
- 1-inch cutting diameter for larger wound access
- Made of solid steel washers for strength and durability
- Self-aligning blade locking system ensures the consistent flight
- 4 blades may have more wind than desired
Wasp Archery is one of the traditional & best choice for the Beginners.
3. RAGE 2-BLADE – Most Reliable Crossbow Broadheads
One of the best things about this mechanical seal head is the SlipCam design, which is deployed at the rear, which mainly solves the problem that the mechanical blade cannot open when it hits.
Stainless-steel Blades
When the leading edge blade comes into contact with the target, the damping ring opens immediately. This technique is also useful if you are shooting at an awkward angle. The stainless steel blade is 0.035 inches thick and expands to create a 2-inch cut diameter, which is sufficient for most cross hunting applications.
High Speed
2-Blade Headheads are highly streamlined in flight and accurate at high speeds. As with the Excalibur bolt cutters, the costs associated with 2-Blade tips are relatively high, especially if you are changing blades or shock rings.
Range 2-Blade deadheads are the mechanical blade of choice for many crossbow hunters. The water head has several functions, making it the title of “Best Mechanical Water Title” in this review.
Features include:
- SlipCam design for rear deployment
- 039-inch leading-edge blade
- 035-inch stainless steel expansion blade
- 2-inch cutting diameter
- Weight of 100 capsules
- Shock-resistant collar technology
- Includes free practice director
- Reliable damping ring technology opens the blade
- Contour simplification during flight
- The cutting diameter of 2 inches
- Suitable for almost all hunting applications
- Durable, expandable stainless steel blade
- High component replacement costs
Rage 2-Blade Roadheader is a reliable, high-quality mechanical roadheader for hunting.
4. G5 OUTDOORS HAVOC – High-Quality Mechanical Roadheader
If you are considering using a mechanical head-head, G5 Havocs may be a viable option. The broadhead consists of high-quality components that optimize accuracy, life, and penetration.
Cutting Diameter
The Holocaust wide head has two sharp blades that expand to form a 2-inch cutting diameter. When comparing Havocs to other Hydeheads with three leaves, the fact that it has only two leaves seems to be a disadvantage.
However, the two blades take up very little space and can enter a smaller area. Havoc bigheads are also unlikely to hit obstacles such as bones to prevent them from penetrating.
Performance
The consistency and performance of Havoc broadheads are unusual in this price range. If you need the finest value for money, this is the mechanical broadhead to ponder.
Since Havocs is a mechanical mind, you may encounter typical issues such as deployment failures and maintenance issues. However, if your crossbow is properly installed, it may not be a problem. G5 Outdoors’ Havoc roadheader is a reliable mechanical roadheader consisting of high-quality components.
Features of this avatar include:
- 2-inch cutting diameter
- “Double Trap” Blade Mounting
- Replaceable dual Lutz blades
- Elastic ring and stainless steel collar
- Suitable for hunting all games
- Replaceable blades expand to form a large 2-inch cutting diameter
- Double blades allow access to smaller areas
- Durable components simplify flight, increase accuracy and penetration
- Good value for money
- Deployment issues at certain speeds
G5 Havoc Roadheader is a high-quality mechanical roadheader with a very high price/performance ratio.
5. GRIM REAPER X-BOW – Affordable Crossbow Broadheads
Grim Reaper broad bones have a long, sleek design, including a chiseled tip that penetrates deep and cuts on contact. The entire head is made of stainless steel, and its mechanism uses friction to open the blade.
Reliable Mechanism
This turtle is suitable for hunting small or thin-skinned animals. The expansion mechanism is reliable, and during flight, the nose has a low profile, which can reduce wind resistance.
Lightweight
Because Grim Reaper’s headhunter has a lightweight, low-profile structure, it is not the best choice for hunting large games or with thick-skinned animals such as elk. However, leaves are a viable option for whitetail deer and pigs.
If you have been studying beavers for more than ten minutes, you may have stumbled across this popular mechanical turtle.
The Grim Reaper X-Bow skull includes:
- 100 capsules in weight
- Three replaceable stainless steel blades with 1½ inch cutting diameter
- High-speed cross design
- Test accuracy from 400 feet to 100 yards per second
- Razor Cut SS Wide Head
- Stainless steel needle
- Smooth, streamlined high-speed bolt design
- Create a larger 3D hole for maximum exudation
- Designed for deep penetration
- Sharp stainless steel tip reduces the impact
- Not suitable for hunting elk or other large games
Grim Reaper roadheader is an affordable abrasive mechanical road header.
6. MUZZY TROCAR CROSSBOW – Highest Accuracy Broadheads
Muzzy Trocar broad fish is a fixed crossbow broad fish with multiple high-end features to ensure accuracy and successful hunting experience.
Solid steel Ferrule
The Muzzy Trocar head is a sharp, three-edged stainless steel head designed for deeper penetration. Since the head is paired with a solid steel ferrule, it may also pierce the bone.
High Accuracy
The 0.035-inch spiral design has a right-handed design that increases stability and reduces wind resistance. The result is consistent flight characteristics and higher accuracy. The compact form factor reaches its full potential at speeds above 400 feet per second.
Replaceable Blades
The three interchangeable blades have a cutting diameter of 1 3/16 inches-large enough for most hunting applications. In addition to the 100-grain weight, the wide head also provides 125-grain weight.
Muzzy Trocar broadhead features include:
- 100 capsules in weight
- 035-inch right spiral design
- The cutting diameter of 1 3/16 inches
- Three fixed and offset blades
- Best accuracy and performance at 400 feet per second or higher
- Steel cannula needle
- made in America
- Fixed replaceable blades provide larger cutting diameter
- Steel trocar tip allows maximum penetration
- Accurate at high arrow speeds
- The right spiral design maximizes stability and improves projectile accuracy
- You must pay close attention to the blades to ensure they are secured
This high-quality fixed Heidelberg is suitable for hunting all games at a reasonable price.
7. Maifield Archery 100-Grain – Runner-Up
Maifield Broadhead is fixed, with three triangular blades and chisel tips. This is one of the lighter models with only 100 capsules, flying fast, and excellent for smaller game proportions. The 0.028-inch blade is highly ground and cuts 1-inch and 1 / 8-inch diameters to open wide wound channels to ensure rapid, humane death.
With Higher Energy
Their tips are also very sharp to ensure they can penetrate the leather quickly and not lose much energy before entering the animal.
The Maifield Archery Broadheads 100-Grain is an excellent choice for anyone seeking an accurate three-bladed fixed broadhead, perfect for knocking down smaller games. It has three very sharp blades made of stainless steel aluminum mix, which is sturdy and durable.
More Stability
The blades are triangular, which helps to enhance the flight stability of the model. These also come with high quality suitcases to ensure their safety during transportation and storage. A possible disadvantage of this type is that only 100 particles means they are lighter and there are fewer punches behind them. This means that penetration may be reduced, resulting in a slower rate of animal death and a reduction in humanity.
- Triangular blades enhance flight stability
- Comes with a suitcase for safety
- Sharp blade made of stainless steel / aluminum mixture
- Lighter grains may reduce penetration.
Maifield Archery is the most Stable, Light weight, high energy & best for knocking down the smaller games.
8. Sinbadteck Hunting Broadheads – Best for the Money
Sinbadteck Hunting Broadheads are fixed and equipped with three super sharp blades. They are 2.8 inches long and 1.035 inches wide. The three-blade triangle makes the flight path more stable and helps improve accuracy. The blades are strong and remain sharp for a considerable period of time.
Best for Smaller Games
Although these models perform best in smaller games due to lighter textures, they have excellent quality and have the right bow and arrow skills, which can still be used to knock down larger games. When three blades are used, the wind spread area is also smaller and therefore more precise than the four blade pattern.
Attractive Design
These are high-quality fixed, with a three-edged triangle design, very sharp and lethal. Made from anodized aluminum shafts and stainless steel blades, they are very rugged and can stay in operation for many seasons. The construction of this model is easy to install and is compatible with cross and compound bow screw-in.
- Three sharp blade triangle designs
- Anodized aluminum shaft and stainless steel blade
- Screw-in Cross and Composite Bow Compatible
- Lighter grain reduces penetration
Sinbadteck Hunting Broadhead has the best design & best for smaller games.
9. Barnett Cross Gamecrusher – Best from Barnett
Barnett Cross Gamecrushers is a mechanical three-blade design. Once the blade hits the target, it will protrude from the body, causing a larger wound, leading to rapid humane death. The fact that the blades are stored in the body during flight reduces the surface area of the wind, making the blades more accurate and less likely to be blown away by crosswinds.
Light Weight
This type is 100 capsules, placing them on the lighter end of the scale, although this does not affect the cutting diameter they provide through the expansion blade.
Good choice for Mechanical Heads
Barnett Cross Gamecrushers is a good choice for those who want to use mechanical heads, especially in smaller games, because their grain weight is lighter. Grind the Diamize blade very sharply and take extra care. They are also offset to form larger wound channels to ensure rapid, humane death from rapid blood loss.
- Super sharp fade blade
- Offset blades for large wound channels
- Trophy tip can withstand repeated hits to bone
- Mechanism may be unreliable
Barnett Cross Gamecrusher is the best lightweight broadhead & is good choice for mechanical heads.
10. Rage Bowhunting CrossbowX – Best Mechanical Broadheads
Want to use the best machinery in Heidelberg? Then, there was nothing else but Rage Bowhunting CrossbowX. They are made of sturdy and durable stainless steel with large sized front edges that are effective and impressive.
Extremely High Accuracy
They are manufactured with extremely high accuracy and huge wound channels, and are also equipped with an exercise head, so you can be sure that you won’t waste your shots once you enter the wild.
The Angry Bowhunting CrossbowX is a great choice for anyone looking to use extremely efficient and high quality mechanical roadheaders. Their cut diameter is large, only two inches wide, and due to the rapid blood loss, it can make the game die quickly and humanely. They are available in 100 and 125 capsules to give them the power they can play and the variety of the particular type of game you plan to hunt.
Best Quality of Blades
In addition to weight selection, this type is also equipped with a ferrule positioning system to provide the most aerodynamic and stable flight path possible. The downside is that Shock Collar technology, which should ensure proper blade retention, does not always work properly and will disrupt your shooting effects and these effects.
- 2 inch wide cutting diameter
- Provides 100 capsules and 125 capsules
- Ferrule centering system helps aerodynamic flight
- Shock-resistant collar technology is sophisticated and does not always retain the blade until impact
Rage Bowhunting has the very high accuracy & super quality blades.
BUYER’S GUIDE
When shopping, don’t choose the first or most affordable product you can find. Instead, take some time to find the right broadhead (or even the right bolt) that will meet all cross hunting needs. The key aspects that must be considered before buying are:
MECHANICAL BLADE OR FIXED BLADE
There are two types of broadheads, namely mechanical blades and fixed blades. In the past, mechanical blades were less reliable than today, so the question of whether you should choose a mechanical blade or a fixed blade is becoming increasingly important.
MECHANICAL
Mechanical blades are the more technical of the two. These tricks unfold the cutting pedal after an impact. Before the impact, when the bolts flew towards the target, the door had a sleek profile and was less susceptible to wind.
Because the mechanical blade will open after impact, the cutting diameter is larger than that of the fixed blade. Some mechanical blades have a cutting diameter of three inches or more.
Fixed Broadheads
Many crossbow hunters prefer fixed broadheads because they are more reliable and effective when hunting large or dangerous animals. Since these blades do not have to be opened after an impact, they are usually thicker and stronger than mechanical blades.
In some hunting camps in the United States, fixed blades are the only broadheads allowed because mechanical blades cannot provide the same robust reliability. Fixed blades are also easier to clean, sharpen and maintain than mechanical blades.
Due to the large cross-section of the fixed blades, which cannot be folded, they often block the wind during flight. It is also difficult to keep the exposed edges sharp when the fixed blade is placed in a shaking.
KINETIC ENERGY
When determining ahead, the kinetic energy of the cross and its maximum arrow speed may be important. Although mechanical blades don’t require a lot of energy to reach their goals, whether they are actual game targets or archery targets, they require a lot of energy to open and penetrate the target.
WEIGHT
The total bolt weight is important when determining what can and cannot be targeted during hunting. There are three weight ranges. The lightweight bolt weighs less than 350 capsules and has a flatter track. These bolts have little penetration, but they are suitable for hunting in open areas where distances are difficult to accurately determine.
Heavyweight bolts weigh over 400 and have sufficient penetrating power, making them suitable for hunting large animals.
PRICE AND QUALITY
In general, you will not be able to use cheap beavers repeatedly. On the other hand, high-end Neptune can not only extend life but also perform better than their affordable counterparts.
After using a high-quality Headhead, you will be able to clean and sharpen it without compromising its structure and performance. Two sets of cheap beavers may cost more than a good set of beavers and may not last long.
SHARPENING YOUR BROADHEAD
Before hunting, you must ensure that the edges are sharp enough to penetrate the target. With Arkansas Stone, you get the best results.
To determine if the blade is sharp enough, use it to shave the hair off your arm. Blades should also be hone between huntings to eliminate corrosion that may dull the blade.
FINAL THOUGHTS/CONCLUSION
Before choosing hunting to meet the needs of hunting broads, you must consider the difference between fixed and mechanical broads.
Each type has its drawbacks and benefits, and your unique settings and skills also come into play when deciding which type is best for you. If you feel a fixed head is right for your needs, we recommend using a three-knife Excalibur Boltcutter head cutter and durable stainless steel construction.
OUR TOP PICK
If you need speed, accuracy and sufficient penetrating power, Excalibur bolt cutters may be your best choice.
Leave a Reply